RE: Re: Geovision 6.1 software

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

That's a really poorly communicated upgrade on Geovision's part - it should
either not install or tell you in no certain terms on the web site :(

I did the upgrade and got the same issue - however, re-installing 6.05 over
the top got back to a working system :)

Paul.


> -----Original Message-----
> From: Mark McCall [mailto:lists@xxxxxxx]
> Sent: 29 October 2004 15:46
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Geovision 6.1 software
>
>
> Great info, thanks Keyvan.
>
> M.
>
>
> -----Original Message-----
> From: keyvan2r [mailto:keyvan@xxxxxxx]
> Sent: 29 October 2004 15:34
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Geovision 6.1 software
>
>
>
> Just spoke to another Geovision supplier (ezCCTV.com) who told me
> that if you buy a card now it will be version 6.1 compatible - if
> you have older ones (inc. V3 cards) then it would need to be sent
> back to the supplier for upgrade. I sounds like a firmware upgrade
> is what is required. There is no way to U/G the firmware via a PC /
> software util. Looking at the capture cards, there is a plug-able
> ROM chip of the type which uses the EPROM machines / programers and
> I suspect that would be the item which needs changing / updateing.
> In any case, it seems highly impractical to send the cards back and
> loose the security system for a week or more. I will try to get
> through to Roy at RFconcepts and see if he will ship out new eprom
> chips and take old ones back for re-programming.
>
> I do want to move to 6.1 as it has several new features which are
> useful - see the geovision site for version history.
>
> Keyvan
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>