The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Geovision 6.1 software


  • Subject: RE: Re: Geovision 6.1 software
  • From: "Mark McCall" <lists@xxxxxxxxxxxxxxxxxxx>
  • Date: Fri, 29 Oct 2004 15:45:52 +0100


Great info, thanks Keyvan.

M.


-----Original Message-----
From: keyvan2r [mailto:keyvan@xxxxxxx]
Sent: 29 October 2004 15:34
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Geovision 6.1 software



Just spoke to another Geovision supplier (ezCCTV.com) who told me
that if you buy a card now it will be version 6.1 compatible - if
you have older ones (inc. V3 cards) then it would need to be sent
back to the supplier for upgrade. I sounds like a firmware upgrade
is what is required. There is no way to U/G the firmware via a PC /
software util. Looking at the capture cards, there is a plug-able
ROM chip of the type which uses the EPROM machines / programers and
I suspect that would be the item which needs changing / updateing.
In any case, it seems highly impractical to send the cards back and
loose the security system for a week or more. I will try to get
through to Roy at RFconcepts and see if he will ship out new eprom
chips and take old ones back for re-programming.

I do want to move to 6.1 as it has several new features which are
useful - see the geovision site for version history.

Keyvan










UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.