[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: X10 Lamp Module
On the other hand, I've got an uplighter that can be dimmed (via an inline
control box with a slider on it), I just pushed the slider to max and
plugged it into an LM12U X10 lamp controller and plugged that into the
wall.
It's been working fine and dimming for a couple of years - no mods needed.
Lee
-----Original Message-----
From: hoodedclawuk [mailto:mawright@xxxxxxx]
Sent: 20 October 2004 12:00
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: X10 Lamp Module
No, not in my experience. You'll have to open the control unit and
join the two live wires together using a terminal block, thus
bypassing the inbuilt dimmer.
Mark
--- In ukha_d@xxxxxxx, Paul Crate <CrateP@S...> wrote:
> Hi All,
>
> Right - I have a question about X10 lamp modules.
>
> In my lounge at home, I have a standing lamp that has its own
dimmer control
> build into the stand and just a normal plug. If I use an X10 lamp
module
> will I be able to dim the light??
>
> Am thinking that the dimmer on the lamp stand will have to be at
its
> brightes setting.
>
> Thanks
> Paul
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|