[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: AutoGlide curtains with the LaserX10 control unit
- Subject: RE: AutoGlide curtains with the LaserX10 control
unit
- From: "Phil Harris" <phil@xxxxxxxxxxx>
- Date: Sun, 10 Oct 2004 16:27:54 +0100
Yes - they will toggle if power is disconnected for more than about 30
seconds and then reapplied no matter whether the Laser curtain controller
is
attached or not.
Phil
> -----Original Message-----
> From: slashcomfort [mailto:yahoo@xxxxxxx]
> Sent: 10 October 2004 16:13
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] AutoGlide curtains with the LaserX10 control unit
>
>
>
> Hi
>
> Normally with the autoglide curtains, if you drop the power
> and reapply, the curtains will close/open depending on there state.
> Anyone know if this still happens with the laser X10
> controller units in place? (which can do discrete
> open/close). Reason i'm asking is cause i dont really want to
> have up to 8 curtain PSU's on 24hrs, would rather turn them
> on when required, do the job, turn them off
>
> thanks in advance
> (any other ideas welcome)
>
> Ade
>
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> $9.95 domain names from Yahoo!. Register anything.
> http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/IBOolB/TM
> --------------------------------------------------------------
> ------~->
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|