The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LCD Screen interfering with X10

To: <ukha_d@xxxxxxxxxxxxxxx>
Subject: RE: LCD Screen interfering with X10
From: "Phil Harris" <phil@xxxxxxxxxxx>
Date: Tue, 30 Mar 2004 12:42:58 +0100
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
Reply-to: ukha_d@xxxxxxxxxxxxxxx


> I use a cheap GNR 15 inch LCD monitor with about 6 appliance
> modules in the immediate vicinity without problems. I can
> operate these from both HV and local control via timers.

I think the problem - as we usually find - comes down to switch mode PSUs.

They're absolute buggers for banging out *HUGE* amounts of mains noise but
an X10 mains filter *SHOULD* cure it - if it doesn't then maybe there's a
fault with the filter?

Phil



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk

Member Offers - http://www.freeranger.co.uk/ukha

Prev by Date: RE: Found Automated Bin on Offer
Next by Date: RE: Found Automated Bin on Offer
Previous by thread: RE: LCD Screen interfering with X10
Next by thread: RE: LCD Screen interfering with X10
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.