The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Morex ext. PSU works fine with TouchScreen pc

To: <ukha_d@xxxxxxxxxxxxxxx>
Subject: RE: Re: Morex ext. PSU works fine with TouchScreen pc
From: "Phil Harris" <phil@xxxxxxxxxxx>
Date: Thu, 11 Mar 2004 12:40:58 -0000
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
Reply-to: ukha_d@xxxxxxxxxxxxxxx


> I found that the network failed to initialise on my VIA board
> when the loading on the power supply got too much. The
> machine would boot but the network was dead. (Lights on
> Ethernet connector out too).  Consistently replacing the CD
> with a Slimline or removing the PCI card made it work
> reliably. This was definitely a power issue and seemed to
> relate to the 'surge' at power on as the HD span up.

Yup ... The network port is the first subsystem to fail if there are
power problems.

Phil

Prev by Date: RE: Re: Morex ext. PSU works fine with TouchScreen pc
Next by Date: RE: C-BUS vs. EIB
Previous by thread: RE: Re: Morex ext. PSU works fine with TouchScreen pc
Next by thread: RE: Re: Morex ext. PSU works fine with TouchScreen pc
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.