[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Re: Convert RF to Composite?
- Subject: RE: Re: Convert RF to Composite?
- From: "Des Gibbons" <des@xxxxxxxxxxxx>
- Date: Wed, 9 Jun 2004 00:25:24 +0100
> -----Original Message-----
> From: daveywavey001 [mailto:da@xxxxxxx]
>
>
> lol! ok ok! point taken. guess i need to explain a bit more. Im
> doing a high end system for a customer. 20x100w channel multi-room
> AV, 16x16 (composite) video switching.
High end, er, you are talking composite, about as low end as you can get ;)
hate the idea
> of "switching" to the TV (terrestrial) source then having to
pick up
> the Sharp LCD remote to change RF channels! So, im thinking - get
> 5 "cheap, small" TV tuner boxes and set each to one of the 5
major
> terrestrial chanels, convert the output to composite (hence the
> question!) and connect to 5 of the free video inputs on the switcher!
So just use tuner boxes that have composite output? Or did I miss
something?
I would say 5 freeview boxes would be good if you can get a signal. There
are some small ones on the market you should be able to find space for
them?
Just make sure you get one that outputs composite on the scart ;)
Cheers, Des.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|