The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: All in Wonder tuner (was: TFT monitor as TV)


  • Subject: Re: All in Wonder tuner (was: TFT monitor as TV)
  • From: "big_red_frog" <anthony.tod@xxxxxxxxx>
  • Date: Mon, 07 Jun 2004 09:22:05 -0000

I have pretty bad interference problems.

The picture has a wavy grain to it, and the sound is mono, and
glitchy.

I am taking a feed direct from my sky+ box.

I have patched the feed I use to my TV to check and that also looks
bad, although it is fine on my TV.

So the questions are...

1. Does my TV have better tuning / amplification, and would a local
signal boost before the AIW help.

2. Is it machine interferance due to shody shielding on the AIW

3. Is it just fine tuning I have an issue with, and if so, where the
hell is the fine tune adjustment on the software!

I have checked that I am handling the image as PAL-I


--- In ukha_d@xxxxxxx, "Paul Robinson" <ukcueman@y...>
wrote:
> When it was working, the quality was good. Although my
aerial/reception isn't perfect - so
> I may have lower standards than you. I had it running on my 37"
Sharp LCD monitor,
> although the intention is to use it permanently on a 15" LCD. I
was
very happy with it
> until this problem showed itself.
>
> Is your quality not good then?
>
> Thanks for the description - I'll give it a go.
>
> Paul
>
> ----- Original Message -----
> From: "big_red_frog" <anthony.tod@z...>
> To: <ukha_d@xxxxxxx>
> Sent: Monday, June 07, 2004 7:47 AM
> Subject: [ukha_d] Re: All in Wonder tuner (was: TFT monitor as TV)
>
>
> > Hi There,
> >
> > Yep, that is what happens, something in DirectX 9b kills it off
as
> > well as other combinational issues. So then you get Video in,
instead
> > of TV or Tuner, and can only select composite or SVideo.
> >
> > There is a microsoft patch here that appeared to make no
difference,
> > but I would advice this first.
> >
> > http://download.microsoft.com/download/f/c/9/fc9b3b60-d7d4-42c6-
ac64-
> > f28ea70fabb9/DirectX9b-KB825116-x86-ENU.exe
> >
> > I thereafter went through several procedures, but I think these
are
> > the main ones.
> >
> > Download from here both the ATI full package of Display Driver,
> > Control Panel, WDM Capture driver which is 29.7 megs.
> >
> > And also
> >
> > Download the individual WDM Capture driver 4.56 megs from the low
> > speed section.
> >
> > Then download the Multimedia center version 9 from here.
> >
> > http://www.ati.com/support/drivers/winxp/radeonopt-xp.html?
> >
type=xp&prodType=mm&prod=aiwWINXPdriver&submit.x=9&submit.y=6
> >
> > Uninstall any version of multimedia center you presently have.
> >
> > Install the full graphic driver package.
> >
> > Install the new multimedia center.
> >
> > At this point you will probably still have the same problem.
> >
> > Go to the Device Manger under the hardware tab of System
properties.
> >
> > In the section Sound, video and games I expect you will see about
6
> > WDM drivers, one or two of which will have exclamations against
them.
> > This is the route of the problem.
> >
> > Remove all the drivers in this section that have WDM in their
title,
> > even if they are not marked with an exclamation mark.
> >
> > Do not reboot at this point, you may of had to many times before.
> >
> > Then install the seperate WDM driver package we downloaded
earlier.
> >
> > Reboot, and system should reregister all the WDM units, and none
> > should be marked exclamation, and now everything should work fine
> > again.
> >
> > When yours works, what is the quality like?
> >
> > --- In ukha_d@xxxxxxx, "Paul Robinson"
<ukcueman@y...>
wrote:
> > > I made the mistake of trying to upgrade to the latest
version,
and
> > now I can't get the
> > > tuner to work again. Have you any advice that might help me
get
it
> > working again? I think
> > > that upgrading to DirectX 9.0 might have been a mistake,
although
> > it's supposedly required
> > > for later versions of ATI's software or maybe downloading
some
of
> > the MS hotfixes.
> > >
> > >
> > > ----- Original Message -----
> > > From: "big_red_frog" <anthony.tod@z...>
> > > To: <ukha_d@xxxxxxx>
> > > Sent: Sunday, June 06, 2004 6:02 PM
> > > Subject: [ukha_d] Re: TFT monitor as TV
> > >
> > >
> > > For now run with ATI remote wonder, myHTPC and All in wonder
for TV
> > > input.
> > >
> > > Anyone have fun with ATI all in wonder.
> > >
> > > Not to mention that 200 combinations of driver installs I
had to
> > make
> > > to get the tuner part to work :-/




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.