Re: Re: PC IR Control

["Frank Mc Alinden" <fmcalind@xxxxxxxxxxxxxx>]

Hi James
> The USB UIRT has a tx jack on the rear, going straight from here to
the
> hv IR in port on FirM and, yes, using a sticky emitter from the out
> port.

Oh i see so the USB UIRT replaces Homevision..neat......

>I was going to ask you whether this sort of set up would be
> possible with FirM Jr, as it would suit a friends system well without
> the cost of a full blown FirM setup

The idea is to make a cheaper ir repeater controller but also make it so
that users can upgrade to a zoning system in the future and still use their
zone receivers.....If  the USB UIRT is working ok with your FirM unit then
it should be ok with FirM Jr ...

Frank


----- Original Message -----
From: "James Mitchelmore" <james@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, July 26, 2004 12:54 AM
Subject: RE: [ukha_d] Re: PC IR Control


> The USB UIRT has a tx jack on the rear, going straight from here to
the
> hv IR in port on FirM and, yes, using a sticky emitter from the out
> port.  I was going to ask you whether this sort of set up would be
> possible with FirM Jr, as it would suit a friends system well without
> the cost of a full blown FirM setup.
>
> James
> -----Original Message-----
> From: Frank Mc Alinden [mailto:fmcalind@xxxxxxx]
> Sent: 25 July 2004 06:41
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Re: PC IR Control
>
> Hi James
>
> > I've just started using USB UIRT along with girder for IR control
(via
> > the FirM system I won at UKHA2004 incidentally) and have been
very
> > impressed with the pairing as a whole.......
>
> How have you tied the USB UIRT into the FirM system...?? Just had a
> quick
> look at the USB UIRT site and i assume you have used a stick on
> emitter(on
> the usb uirt) to get the received ir from FirM...How do you get the ir
> out
> from the USB UIRT to FirM ?????
>
> Actually FirM Jr would be more suited to the above application as it
has
> an
> ir jack to allow for ir injection from another hardware / pc
> device......Should be receiving my FirM Jr soon to test......
>
> Frank
>
>
> ----- Original Message -----
> From: "James Mitchelmore" <james@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Sunday, July 25, 2004 12:52 PM
> Subject: RE: [ukha_d] Re: PC IR Control
>
>
> > I've just started using USB UIRT along with girder for IR control
(via
> > the FirM system I won at UKHA2004 incidentally) and have been
very
> > impressed with the pairing as a whole.  USB UIRT does exactly
what it
> > says on the tin, as it were.  I'd be happy to write a short
review
> when
> > I get the time.  As for Girder, the flexibility it presents in
terms
> of
> > sending IR commands based on many potential inputs/conditions are
> > immensely powerful given the simplicity of its use.
> > In short, for the straightforward control of a freeview box, I
would
> say
> > you couldn't go wrong.
> >
> > James
> >
> > PS having re read your mail, I'm not familiar with digiguide, but
see
> > above re girder. I'm confident there's a way!
> >
> > -----Original Message-----
> > From: Mark McCall [mailto:lists@xxxxxxx]
> > Sent: 24 July 2004 14:03
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] Re: PC IR Control
> >
> > > BTW I'm the UK stockist so you could have it next working
day!
> >
> > Darren
> >
> > Post like this should have [ADVERT] in the subject line and are
> limited
> > to
> > one per month as in this groups guidelines.
> >
> > Do you have anyone that could send in a review of this unit for
the
> > website?
> >
> > Thanks
> >
> > M.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Sponsor
> >
> >
> > ADVERTISEMENT
> >
> >
> <http://us.ard.yahoo.com/SIG=129nefns3/M=283686.4531047.5839501.4420029/
> >
>
D=groups/S=1705041992:HM/EXP=1090760622/A=2044486/R=0/SIG=10svm8ftb/*htt
> > p:/www.theironshop.com> click here
> >
> >
> >
> <http://us.adserver.yahoo.com/l?M=283686.4531047.5839501.4420029/D=group
> > s/S=:HM/A=2044486/rand=289506178>
> >
> >   _____
> >
> > Yahoo! Groups Links
> > *         To visit your group on the web, go to:
> > http://groups.yahoo.com/group/ukha_d/
> >
> > *         To unsubscribe from this group, send an email to:
> > ukha_d-unsubscribe@xxxxxxx
> > <mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe>
> >
> > *         Your use of Yahoo! Groups is subject to the Yahoo!
Terms of
> > <http://docs.yahoo.com/info/terms/>
 Service.
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Sponsor
>
>
> ADVERTISEMENT
>
> <http://us.ard.yahoo.com/SIG=129rejne9/M=295196.4901138.6071305.3001176/
>
D=groups/S=1705041992:HM/EXP=1090820477/A=2128215/R=0/SIG=10se96mf6/*htt
> p:/companion.yahoo.com> click here
>
>
> <http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=group
> s/S=:HM/A=2128215/rand=575916118>
>
>   _____
>
> Yahoo! Groups Links
> *         To visit your group on the web, go to:
> http://groups.yahoo.com/group/ukha_d/
>
> *         To unsubscribe from this group, send an email to:
> ukha_d-unsubscribe@xxxxxxx
> <mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe>
>
> *         Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> <http://docs.yahoo.com/info/terms/>
 Service.
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>