[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: XBox - Component connectors
- To: <ukha_d@xxxxxxx>
- Subject: RE: XBox - Component connectors
- From: "Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>
- Date: Thu, 1 Jan 2004 22:25:21 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Thanks Paul,
Tim H.
> -----Original Message-----
> From: Paul Gale Sent: 01 January 2004 11:47
>
> http://www.gamesx.com/avpinouts/xbox.htm
>
> I guess you would need a connector that is full wired to do
> anything though. Wonder if you can get bare DIY connectors?
>
> Paul.
>
>
> > -----Original Message-----
> > From: Hawes,Timothy Edward (GEG) [mailto:haweste@xxxxxxx]
> > Sent: 01 January 2004 10:25
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] XBox - Component connectors
> >
> > > -----Original Message-----
> > > From: Paul Gale Sent: 30 December 2003 10:16
> > >
> > > I found a site with the pinout diagrams for the Xbox
> > > connector - there are three pins that set the type of output
> > > depending on whether they are shorted to ground or not.
> >
> > Paul,
> >
> > Could you post the URL please.
> >
> > Thanks,
> >
> > Tim H.
+
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|