The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

X10 LM11 Din dimming module advice needed


  • Subject: X10 LM11 Din dimming module advice needed
  • From: "darren_karp2001" <darren@xxxxxxxxx>
  • Date: Fri, 17 Dec 2004 17:46:56 -0000



If I install 4 of these modules in my consumer unit can I control
each circuit via my pronto remote and X10 mini controller? The
reason why I ask is that I have read that the LM11 'MUST' be
connected to a momentary switch. I do of course want to
have 'manual / SWMBO' control and again advice on this would be
welcomed. We want to have a wall plate in brushed stainless / satin
silver finish but what I don't want is to have to 'cycle' through
dim to bright, etc. which apparently happens if you use momentary
switches; instead is there some kind of wall plate which has a
seperate dim and brighten button? along with of course one for
on/off?

I'm using LV Halogen in each of the 4 zones with a maximum of 400W
per zone.

Many thanks
Darren






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.