[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Ethernet Boards
I don't have one but do have a temperature controlled soldering iron. I
use a .8mm tip for all my smt soldering without any problems. There is a
knack to it though which I am happy to share if anyone wants to be
enthralled into a coma like sleep.
My attempts at removing smt components with a hot air gun have been
moderately successful but always resulted in the comprehensive destruction
of the PCB.
Ian
"Ward, David" <DAvid.Ward@xxxxxxx>
07/12/2004 11:41
Please respond to ukha_d
To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
cc: (bcc: Ian Bird/CV/Novartis)
Subject: RE: [ukha_d] Ethernet Boards
I've been considering one of these
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=45069&item=43415053
74&rd=1
no connection, other than thinking that it may be handy....
having said that, I've had success desoldering SMT stuff using a careful
Hot
Air Gun
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|