[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Automatic curtains and C-Bus
- Subject: RE: Automatic curtains and C-Bus
- From: "K. C. Li" <li@xxxxxxxxx>
- Date: Thu, 12 Aug 2004 11:49:05 +0100 (BST)
On Thu, 12 Aug 2004, Benfield, John (ITD) wrote:
> Do you replace the Dawn/Dusk controller with the C-Bus connection, or
does
> the C-Bus connection actually fit into the controller?
The Silent Gliss Autoglide Dawn and Dusk motor controller is built into
the motor housing. There are two RJ11 sockets there. One is for the light
sensor and can remain in place, the other is for the manual push button.
Simply disconnect the button and connect to the C-Bus relay module via a
CAT5 cable. With a bit of fiddling, the original push button may be
retained for toggle action. ie. Press to close, another press to open and
so on.
We have the RJ11 connection details if required.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
http://www.cbus-shop.com
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|