The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: (unknown)


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [OT] PC Failure - suggestions please


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: [OT] PC Failure - suggestions please
  • From: "mike" <mikegriff@xxxxxxx>
  • Date: Sun, 14 Sep 2003 01:54:42 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx





_____

From: Paul Gale [mailto:groups@xxxxxxx]
Sent: 13 September 2003 18:14
To: ukha_d@xxxxxxx



I was working for a PC manufacturer when the AGP card first came out -
there
were lots of problems like this due to an error with the AGP dimensions
spec
I believe. The back of the card would rise up out of the slot a little due
to the twisting forces caused by screwing the card down. Later designs
included the little catch mechanism you now see on some cards/mainboards.

Paul.



-----Original Message-----
From: mailinglists@xxxxxxx [mailto:mailinglists@xxxxxxx]
Sent: Saturday, September 13, 2003 5:38 PM
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] [OT] PC Failure - suggestions please



The other thing to check is that the AGP card is properly sitted.
Some don't sit right at the best of times, but a 'not quite fully plugged
in'
AGP card will give just those symptoms.
I've had it a few time with new builds - it can take a couple of attempts
to get the card seated properly. It's due to a double row of connectors
on each side of the AGP card.

Best of luck!

-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 13 September 2003 16:59
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] [OT] PC Failure - suggestions please


Check that the CPU fan is still seated properly, and is powering up
correctly: most modent mobos have sensing circuitry and will fail to
powerup
if the CPU fan is dead or absent.

Ian
----- Original Message -----
From: "Dean Barrett" <dean@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, September 13, 2003 4:16 PM
Subject: [ukha_d] [OT] PC Failure - suggestions please


> Help please..
>
> Switched PC off yesterday,moved it about 2 foot, powered up today -
now
not working :(
>
> Im not getting any display, no POST beeps or anything. I hear the CD
and
HD spin up, but nothing happens at all ??
>
> Has anyone got any suggestions - Processor failure ??
>
> If i get beeps i usually know what i'm looking for, but nothing at all
has
me beat.
>
>
>
> Dean.
>
>
>
>
> ** UKHA2004 BE THERE! ** - start planning now.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>


[Non-text portions of this message have been removed]







Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.