[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Xantech Emitters
- To: ukha_d@xxxxxxx
- Subject: Re: Xantech Emitters
- From: "David Buckley" <db@xxxxxxx>
- Date: Mon, 01 Sep 2003 19:50:59 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
--- In ukha_d@xxxxxxx, "bquinn123456" <bquinn@i...> wrote:
> Hi folks,
> Quick xantech ir question, I've got a simple xantech setup (below):
>
> Reciever --> Connector Block(cb12) --> CAT5 ---> Connector
Block
> (cb12) --> Emitter
>
> Is it possible to connect a second emitter directly to the
> interconnecting CAT5 cable (if so, how?), or do I have get an
> amplifier or another connection block?
Yes, you can connect an emitter using a series resistor direct to
the wiring, between the signal (S) and ground (G) cores. With
Xantech, all the smarts are in the receiver.
Home |
Main Index |
Thread Index
|