[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: 1U PSU's/heat removal
- To: <ukha_d@xxxxxxx>
- Subject: RE: 1U PSU's/heat removal
- From: "Paul Gale" <groups@xxxxxxx>
- Date: Mon, 1 Sep 2003 13:40:17 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I just tried el cheapo Marley one from B&Q I think it was. Not the
quietest, but mounted away from the room seems OK. Reasonable suck on it
but this will depend on the length of hose you use (I just vent the air
into the loft)
Paul.
-----Original Message-----
From: Hawes,Timothy Edward (GEG) [mailto:haweste@xxxxxxx]
Sent: 01 September 2003 13:34
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] 1U PSU's/heat removal
Paul,
Did you get your inline one from Screwfix or somewhere else ? I've been
looking at that for another application and wondered about the noise, suck,
etc.
As for other sources, you could try Villavent (whole house ventilation
people). Others over on the Selfbuild list would be able to suggest some
other companies too :-)
Cheers,
Tim H.
> -----Original Message-----
> From: Paul Gale
>
> Bathroom extract fans - how about using an in-line type ( as
> I have ) - you can then mount it away from the room in the
> loft and insulate it sonically by using rubber washers
> between the fan and joists. Of course, this is providing the
> room is upstairs.
>
> You can get very quiet fans but will probably need to get
> them from a specialist supplier or order from electrical
> merchant - Vent Axia is worth a go.
>
> Paul.
+
Home |
Main Index |
Thread Index
|