Re: Re: SCART Connections

["JAMES" <JAMES9254@xxxxxxx>]

what about csync would this go to pin 20?
----- Original Message -----=20
From: Keith Doxey=20
To: ukha_d@xxxxxxx=20
Sent: Tuesday, October 07, 2003 10:20 PM
Subject: [ukha_d] Re: SCART Connections


--- In ukha_d@xxxxxxx, "JAMES" <JAMES9254@N...> wrote:
> Hi all does anyone know what pins i would use for these=20
connections ? and would i use video gnd as the gnd for the=20
red/green/blue? thx.
>=20
> 1.GND Audio
> 2.GND Video
> 3.RED
> 4.GREEN
> 5.BLUE
> 6.GND Supply
> 7.CSYNC
> 8.GND Supply
>=20

Hi James,

http://www.diyha.co.uk/electronics/scart.html

Use Video Ground at the 8 pin connector end, RGB each have their own=20
ground pins in the SCART. Although all pins marked as Ground SHOULD=20
be connected to ground inside the equipment this is not alwas the=20
case as people have found in the past with some of the Response CCTV=20
cameras which would work when plugged into a TV but not into SCART=20
adapters that only had some pins connected.

Hope that helps

Keith

www.diyha.co.uk
www.kat5.tv