[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: SCART Connections
- To: ukha_d@xxxxxxx
- Subject: Re: SCART Connections
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Tue, 07 Oct 2003 21:20:06 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
--- In ukha_d@xxxxxxx, "JAMES" <JAMES9254@N...> wrote:
> Hi all does anyone know what pins i would use for these=20
connections ? and would i use video gnd as the gnd for the=20
red/green/blue? thx.
>=20
> 1.GND Audio
> 2.GND Video
> 3.RED
> 4.GREEN
> 5.BLUE
> 6.GND Supply
> 7.CSYNC
> 8.GND Supply
>=20
Hi James,
http://www.diyha.co.uk/electronics/scart.html
Use Video Ground at the 8 pin connector end, RGB each have their own=20
ground pins in the SCART. Although all pins marked as Ground SHOULD=20
be connected to ground inside the equipment this is not alwas the=20
case as people have found in the past with some of the Response CCTV=20
cameras which would work when plugged into a TV but not into SCART=20
adapters that only had some pins connected.
Hope that helps
Keith
www.diyha.co.uk
www.kat5.tv
Home |
Main Index |
Thread Index
|