Re: Web Server help required.

["Jeremy M. Harmer" <jeremy@xxxxxxx>]

If you are calling using the DNS name of the external IP, try setting
entries in the hosts files on your internal systems such that they target
the internal IP directly. I had to do this - one Linux box running 5
virtual
web servers, each with a registered name. The internal hosts file is used
by
PCs internally, as otherwisde they do a DNS lookup and find the IP of the
external port and get nowhere.

Jeremy.

----- Original Message -----
From: "Dean Barrett" <dean@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, October 01, 2003 8:42 PM
Subject: RE: [ukha_d] Web Server help required.


> Thanks for the help Jeremy & Glen.
>
> I've now got access to two machine from one IP using the :port
address.
>
> Not quite there yet though... - Now the Geovision software thinks its
server
> address is the external IP address rather than its own network adaptor
?? -
> So close... I think i can configure the software to go through a
gateway
> which can be its own address. Hopefully this will work.
>
> Thanks again - when its working everyone can have a look :)
>
>
>
> Dean.
>
>
> -----Original Message-----
> From: Jeremy M. Harmer [mailto:jeremy@xxxxxxx]
> Sent: 01 October 2003 19:56
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Web Server help required.
>
>
> Hi,
>
> If I understand (doubtful it has to be said!!) I think you need to set
up
> two portmappings, say 80 and 81, on the router. Map 80 to one web
server
and
> 81 the other. Then externally accessing the IP of your router say
1.2.3.4,
> 1.2.3.4:80 (default for web) will see one server, and 1.2.3.4:81 the
other.
>
> Jeremy.
>
> ----- Original Message -----
> From: "Dean Barrett" <dean@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Wednesday, October 01, 2003 7:41 PM
> Subject: [ukha_d] Web Server help required.
>
>
> > I have an IP address via Dynamic DNS that points at my Draytek
router.
The
> > router allows traffic into a specific internal IP address,i.e.
Webserver.
> > This webserver is running CBus HomeGate and can be accessed from
net
fine.
> >
> > I now have another server running Geovision CCTV system, this too
has a
> web
> > server.
> >
> > I thought i'd be able to have a page on the external facing
server
(CBus)
> > referencing the internal one (CCTV) thus allowing one external
connection
> to
> > see both servers. It doesnt work :(
> >
> > If I try it from a PC in the office it works fine, if i try it
from home
> it
> > works fine as it uses VPN to get to the internal webserver.
> >
> > I dont want to put CBus server (IIS) on the CCTV server, not sure
if
both
> > web servers would run together, so i'm now stuck. So is it
possible for
my
> > one IP address to see two servers - can the Draytek allow 2
internal
> > addresses to be seen from the outside ??
> >
> > I'm getting confused now :)
> >
> >
> >
> > Dean.
> >
> >
> >
> >
> >
> >
> >
> > UKHA 2004: 15th and 16th May 2004
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>