RE: Web Server help required.

["Dean Barrett" <dean@xxxxxxx>]

Thanks for the help Jeremy & Glen.

I've now got access to two machine from one IP using the :port address.

Not quite there yet though... - Now the Geovision software thinks its
server
address is the external IP address rather than its own network adaptor ?? -
So close... I think i can configure the software to go through a gateway
which can be its own address. Hopefully this will work.

Thanks again - when its working everyone can have a look :)



Dean.


-----Original Message-----
From: Jeremy M. Harmer [mailto:jeremy@xxxxxxx]
Sent: 01 October 2003 19:56
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Web Server help required.


Hi,

If I understand (doubtful it has to be said!!) I think you need to set up
two portmappings, say 80 and 81, on the router. Map 80 to one web server
and
81 the other. Then externally accessing the IP of your router say 1.2.3.4,
1.2.3.4:80 (default for web) will see one server, and 1.2.3.4:81 the other.

Jeremy.

----- Original Message -----
From: "Dean Barrett" <dean@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, October 01, 2003 7:41 PM
Subject: [ukha_d] Web Server help required.


> I have an IP address via Dynamic DNS that points at my Draytek router.
The
> router allows traffic into a specific internal IP address,i.e.
Webserver.
> This webserver is running CBus HomeGate and can be accessed from net
fine.
>
> I now have another server running Geovision CCTV system, this too has
a
web
> server.
>
> I thought i'd be able to have a page on the external facing server
(CBus)
> referencing the internal one (CCTV) thus allowing one external
connection
to
> see both servers. It doesnt work :(
>
> If I try it from a PC in the office it works fine, if i try it from
home
it
> works fine as it uses VPN to get to the internal webserver.
>
> I dont want to put CBus server (IIS) on the CCTV server, not sure if
both
> web servers would run together, so i'm now stuck. So is it possible
for my
> one IP address to see two servers - can the Draytek allow 2 internal
> addresses to be seen from the outside ??
>
> I'm getting confused now :)
>
>
>
> Dean.
>
>
>
>
>
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/