[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
placing speakers and microphones
- To: "Home automation" <ukha_d@xxxxxxx>
- Subject: placing speakers and microphones
- From: "Nikola Kasic" <nikola@xxxxxxx>
- Date: Tue, 20 May 2003 15:27:49 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I finished most of the wiring and I plan to put speaker and microphone
into each room. I will put speakers first (for PA) and mics later (they
are more expensive).
I need to know where should I place them relative one to another. The
cables are pulled together and they come to the same point on the wall.
Should I position them as apart as possible, or it doesn't matter. Mics
are supposed to be for voice commands, so I would not like speakers to
saturate them.
They will be both on the same wall.
What if I use the same plasterboard partition wall for installing
speakers in two rooms, should they be separated, or can be one next to
other, each facing separate room?
Any comments are wellcome.
Cheers,
Nik
[Non-text portions of this message have been removed]
Home |
Main Index |
Thread Index
|