[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: comfort fitting
- To: ukha_d@xxxxxxx
- Subject: Re: comfort fitting
- From: HA <ha@xxxxxxx>
- Date: Tue, 4 Mar 2003 17:41:49 +0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
A few things to keep in mind.
1) You would need screened cable for the keypads.
2) comfort recommend screened cable for PIR's but they SHOULD be ok
with existing cable.
3) comfort has the option to fit a couple of resistors with each sensor
so the two conductors can double as a 24 hour loop, this would entail
opening up each PIR and door sensor (the surface mount magnetic door
contacts I have had just enough room inside for these), don't know
whether other alarms have this but I'd never seen it before and it
seems a good idea.
Alan Shields
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|