RE: Anyone know anything about Fujitsu LCD Screens ?

["Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>]

Marc,

A mate has one of these although he's not tried to get it working yet. It's
from a PoS terminal i.e. a till, called a TeamPoS 2000. Does it look like
one of these ?
http://www.ftxs.fujitsu.com/fujitsutemp.asp?navid=691

There's a Fujitsu site with miscellaneous drivers here (incl. the
touch-screen driver).
http://www.ftxs.fujitsu.com/fujitsutemp.asp?navid=47

We haven't found a PSU yet and we suspect the 5V is only for the
touch-screen interface (serial). The 12V would be for the screen-proper.
Holidays and work pressures have stopped us getting much further. Should be
possible to lash something up though.

The screen signal connection is a "DFP" connector (DFP = Digital
Flat Panel) and is an early version of the DVI monitor interfaces. The
screen is fully digital, so you can't make up your own connector and run it
from a standard VGA port, although it is compatible with one of the current
DVI standards. You can see the different types of plug / interfaces here:
http://www.ramelectronics.net/html/DVI_monitor_cables.html
There's also some descriptions of what works with what.


Just out of interest, where did you get it, . . . and do they have any more
??


HTH,

Tim H.
(tries to hide wallet)


> -----Original Message-----
> From: mrf@xxxxxxx
>
> Hi Guys,
>
> I wonder if you can help. I've recently just taken a gamble
> and bought a
> second hand Fujitsu 12.1" touchscreen. The only problem is,
> it is missing
> the power pack, and monitor lead. Fujitsu don't seem to be
> able to locate
> any parts for the item, and to be honest, don't seem to have
> really heard of
> it. Anyone know of a way round this ?
>
> The power socket is a round 4 pin type, and the socket for
> the PC connector
> is a long flat type, not your usual VGA connector.
>
> On the back it has...
>
> +5/+12 VDC
> 0.7/1.2A
> Model 2000 FTP LCC43/LCC43L
> Part No. CA05812-B310/90000167
> E/N: MPL-LCD02
>
> Does Fujitsu always use flat type connectors on their LCD's ?
> I am wondering
> if they might be interchangable ?
>
>
> Anyone have any ideas ? I don't want ot throw it away :(
> especially as it
> cost me ?150 !
>
> Cheers
>
> Marc

+