The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Mains Cabling

To: <ukha_d@xxxxxxx>
Subject: Mains Cabling
From: "Tracey Gardner" <tracey.gardner@xxxxxxx>
Date: Tue, 27 May 2003 18:30:16 +0100
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
References: <bb04oi+t3f0@xxxxxxx>
Reply-to: ukha_d@xxxxxxx


1.0 sq mm T & E is rated for 10amps which equates to a maximum load of
approx 2.4kw.
If you use 1.5 sq mm it would be good for 15 amps or 3.6kw.

Tracey

> I wish to use 1.0mm mains cable to connect to the loads.
>
> How do I work out what load this cable can safely handle
> in terms of floodlight wattage and mains outlets (both for
> low voltage lighting transformers and radios/amplifiers)
>

References:
- Mains Cabling
  - From: "jonathanfarmeruk" <ukha@xxxxxxx>

Prev by Date: Re: Mains Cabling
Next by Date: Re: Mains Cabling
Previous by thread: Re: Mains Cabling
Next by thread: Re: Mains Cabling
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.