The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: APCUPSD (was RE: APC Smart UPS 1400 cable)


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: APCUPSD (was RE: APC Smart UPS 1400 cable)
  • From: "Paul" <groups@xxxxxxx>
  • Date: Sun, 20 Jul 2003 12:15:37 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks Lee, I'm just looking at the docs now.

Paul.



-----Original Message-----
From: Lee Causier [mailto:LeeCausier@xxxxxxx]
Sent: 20 July 2003 12:13
To: ukha_d@xxxxxxx
Subject: Re: APCUPSD (was RE: [ukha_d] APC Smart UPS 1400 cable)



Here we go....

Windows (Stable) Binaries:
http://heanet.dl.sourceforge.net/sourceforge/apcupsd/winapcupsd-3.8.6.tar.gz

Linux (Stable) Source:
http://heanet.dl.sourceforge.net/sourceforge/apcupsd/apcupsd-3.8.6.tar.gz

RedHat 8 (Stable) Binaries:
http://heanet.dl.sourceforge.net/sourceforge/apcupsd/apcupsd-3.8.6-1_rh8.i386.rpm

Do bear in mind that the windows version is compiled against cygwin and
I haven't tried it myself. Also, I don't know how useful a rh8 binary
would be on mandrake. YMMV. If you need more info, take a look at
www.apcupsd.com

Regards,

Lee Causier, reporting from the armchair.

On Sun, 2003-07-20 at 12:01, Lee Causier wrote:
> http://www.apcupsd.com/systems.html
>
> Silly me.... looks like APCUPSD supports windows too!
>
> On Sun, 2003-07-20 at 11:57, Lee Causier wrote:
> > My thought is use apcupsd on the Mandrake box with master/slave
mode and
> > write a small C++ or VB app to accept the alerts from apcupsd ond
> > perform a shutdown after 'n' minutes, leaving apcupsd to shut
down the
> > mandrake server. I'm looking into this for you and will mail you
again
> > with my thoughts in a minute. If you have anything else you'd
like to
> > say, feel free to do so :)
> >
> > Hope This Helps
> >
> > Lee Causier, back in a mo.
> >
> > On Sun, 2003-07-20 at 11:26, Paul wrote:
> > > mmm... a possibility.
> > >
> > >
> > >
> > > I have the following connected to the UPS:
> > >
> > >
> > >
> > > W2K Server - Exchange 2000, IIS - UPS serial port connected
to this currently
> > >
> > > W2K Server - ISA Server, Satellite BB connection
> > >
> > > Mandrake Linux Server - Apache, zoneminder etc
> > >
> > >
> > >
> > > For a software shutdown solution, I will obviously also need
to connect my switch to the UPS as well and software that works on Windows
and Linux boxes???
> > >
> > > Paul.
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Lee Causier [mailto:LeeCausier@xxxxxxx]
> > > Sent: 20 July 2003 11:19
> > > To: ukha_d@xxxxxxx
> > > Subject: Re: [ukha_d] APC Smart UPS 1400 cable
> > >
> > >
> > >
> > > Whilst I haven't got round to doing it (as my sparc box that
is hooked
> > > up to the UPS serial port isn't fully set up yet) yet, I
gather that
> > > under Linux, apcupsd can send signals to daemons running on
other
> > > machines, but I dont know if it uses the same protocol as
the UPS'
> > > notwork interface card, so I'm not sure whether it would
work with
> > > PowerChute.
> > >
> > > One possibility (I'm not versed fully in electronics so dont
quote me on
> > > this) would be if you're using the simple signalling cable
to connect
> > > more endpoints to it as it's relay operated iirc.
> > >
> > > Just a few thoughts... I'll probably have samething more
sane to tell
> > > you later... when I've woken up properly, that is.
> > >
> > > Lee Causier.
> > >
> > > On Sun, 2003-07-20 at 10:30, wayne wrote:
> > > > Hiya!
> > > > Just to jump in here, if you want powerchute to run on
and shutdown a 2nd
> > > > server/workstation you will need a dedicated connection
to that ups.
> > > >
> > > > To get this, you need an interface expander plugged
into the ups (theres a
> > > > black blanking cover on the back - it goes in there).
Theres two types you
> > > > can get - one with basic ports the other with smart
ports.
> > > >
> > > > The serial port that is built into the ups is a 'smart'
port and can send
> > > > all sorts of data to the pc connected to it, the basic
ports just send
> > > > 'power fail, battery low' type info - still enough for
powerchute to work
> > > > from.
> > > >
> > > > If you need any more than 3, then you can get somthing
called a ShareUps -
> > > > this plugs into your ups serial port and gives 8 ports.
> > > >
> > > > Oh - just as an 'extra', the new ups's are coming out
with USB ports on the
> > > > back too, this can be used instead of the smart serial
port. APC dont
> > > > support using both - its either one or the other...
> > > >
> > > > Take a look http://www.apcc.com/products/family/index.cfm?id=60
<http://www.apcc.com/products/family/index.cfm?id=60
<http://www.apcc.com/products/family/index.cfm?id=60&tab=models>
&tab=models> &tab=models
> > > >
> > > > Off from 'doing it in hardware', you can run batch
files at various points
> > > > through the power fail events (depending on what
version of powerchute) so
> > > > you could try sending remote shutdown commands in a
batch file to shut down
> > > > the other pcs (wnt /w2k?) - never tried this approch
myself but cant see why
> > > > it wouldnt work.
> > > >
> > > > Hope this helps.
> > > >
> > > > Wayne.
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Paul" <groups@xxxxxxx>
> > > > To: <ukha_d@xxxxxxx>
> > > > Sent: Sunday, July 20, 2003 9:33 AM
> > > > Subject: RE: [ukha_d] APC Smart UPS 1400 cable
> > > >
> > > >
> > > > Lee,
> > > >
> > > > Do you have more than one PC connected to your UPS? I'm
using the PowerChute
> > > > software but can't work out how to signal to more than
one server to shut
> > > > down. If I run the installer for the APC agent on the
second PC, it asks for
> > > > connection info to the UPS (which it doesn't have).
> > > >
> > > > Any ideas?
> > > >
> > > > Paul.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ** UKHA2004 BE THERE! ** - start planning now.
> > > >
> > > > http://www.automatedhome.co.uk
> > > > Post message: ukha_d@xxxxxxx
> > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > List owner:  ukha_d-owner@xxxxxxx
> > > >
> > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Sponsor
> > >
> > >
> > >
> > > ADVERTISEMENT
> > >  <http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=1705041992:HM/A=1663535/R=0/SIG=11ps6rfef/*http:/www.ediets.com/start.cfm?code=30504
<http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=1705041992:HM/A=1663535/R=0/SIG=11ps6rfef/*http:/www.ediets.com/start.cfm?code=30504&media=atkins>
&media=atkins> click here
> > >
> > >
> > >   <http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupmail/S=:HM/A=1663535/rand=718942660>
> > >
> > >
> > > ** UKHA2004 BE THERE! ** - start planning now.
> > >
> > > http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > List owner:  ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! <http://docs.yahoo.com/info/terms/>
 Terms of Service.
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ** UKHA2004 BE THERE! ** - start planning now.
> > >
> > > http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > List owner:  ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> >
> > ** UKHA2004 BE THERE! ** - start planning now.
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
>
> ** UKHA2004 BE THERE! ** - start planning now.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>








Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.