The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Distributing SVGA


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Distributing SVGA
  • From: "Paul" <groups@xxxxxxx>
  • Date: Sat, 19 Jul 2003 13:39:51 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yes - VDC (van damme cable) is known in the A/V industry as some of the
best you can get but not cheap.



How are you going to distribute the signals - one source to many displays
or several VGA cards? ... or use a splitter/amp of some kind?

Paul.



-----Original Message-----
From: big_red_frog [mailto:anthony.tod@xxxxxxx]
Sent: 19 July 2003 13:28
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Distributing SVGA



Only seems to be in 50 meter reels at CPC at 200 pound.

Maplin have the normal, not mini by the meter at 4 pound a meter!!!

Gulp, maybe I have to rethink my strategy...

--- In ukha_d@xxxxxxx, "Rob Mouser" <rmouser@t...> wrote:
> The vandamme 5 core mini red series is an excellent cable for this
> purpose. I have a 15m run going to my plasma. 5 cores of 75ohm coax,
> very flexible. VERY high quality. You can get by the metre from CPC
as
> far as I can remember.
>
> http://www.van-damme.co.uk/range.htm
>
> To quote:
>
> Red Series Mini Video Multicore
> 4 and 5 way miniature 75ohm video multicores specified to give
maximum
> electrical performance within a reduced overall diameter. Designed
to
> fit into Dsub connectors for computer monitor, high resolution
videowall
> and projection applications. Excellent flexibility and mechanical
> strength. Colour coded cores for identification. Reliable crimp
> terminations using RG179 BNCs
>
> Many thanks
>
> Rob Mouser
>
>
> -----Original Message-----
> From: big_red_frog [mailto:anthony.tod@xxxxxxx...]
> Sent: 19 July 2003 10:13
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Distributing SVGA
>
> Hi all,
>
> I am intending to run a few flat panel monitors built in around the
> house possibly from a single MYHTPC server, but what is the best
way
> to distribute the svga signal around the building? No huge runs,
> nothing over 10 meters, but I am cabling in the wall and floor
space
> now, so i need to get it in ASAP!
>









Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.