[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Video Amplifier Version 3
- To: <ukha_d@xxxxxxx>
- Subject: Video Amplifier Version 3
- From: "Mark Marooth" <mark@xxxxxxx>
- Date: Mon, 23 Jun 2003 15:53:31 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi All,
Well after a bit of fiddling about and a bunch of advice from Ian Bird and
Keith Doxey, I've changed the design sightly and am ready to make up a
couple of prototype cards.
I hope that I've not forgotten anything but no doubt I'll find out as I put
it together. Anyone still interested, here is the URL where you can see
the
PCB as either a PDF or as a Proteus layout (LYT) file.
http://www.marooth.org/projects/electronics/vidamp/Video_Amp.htm
Note that two links will have to be soldered onto the copper side of the
board, I have drawn these on the component side but they are between
R105/R108 and R205/R208.
I've learned/relearned a lot about PCB design while doing this but I
suspect
that I have a lot still to learn :-)
Cheers & Beers,
Mark
Home |
Main Index |
Thread Index
|