C_Bus Question

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi All
        This ones for Rob / Kevin
I probably should reread the Clipsal manual but hopefuly this is an easy
one......

Last nite i got the C_Bus happening and was playing with the aux inputs
which will get connected to relays controlled by Genesis......Now what i
would like (had it working at one stage) is when an input is triggered (i
assume long press as the minimum time is 1 second ) caused by a pir
activation plus time late at nite that the group output goes to say 50% and
after approx 5 minutes ramps off.......I can get the output to 50% ok but
cant seem to get the timer function to happen.......any ideas..Have set the
time value for 5 minutes and to ramp off when timer expired...

short press = idle
short release = idle
Long press =recall 1
Long release = start

Frank

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.