[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: CM12U unresponsive
On Sun, 21 Dec 2003 20:40:26 -0000, you wrote:
>i'm on my third in about 4 years... I assume you've done the obvious
and
>checked the fuse? :-) Next I'd stick the CM12U under your nose and
take a
>big sniff! I've found if there is a distinct acrid burnt smell it's
time to
>reach for the credit card again.
Hi,
Interesting you should say that. I am on my third in about two years.
Touch it carefully. They are warm to touch in normal operation but
they go uncomfortably hot when they fail, and like Malcolm said above
smell rather burnt. Of the two I had that failed one went completely,
the other like you have found would partly respond. Mine would switch
the light in that room on, but for some reason the signals would not
travel to more distant rooms!
Can I ask if you plugged anything into the same socket? Mine seemed to
fail last time I plugged a vaccum cleaner into a nearby socket. I have
wondered if electrical interference was somehow to blame?
Thanks.
UKHA 2004: 15th and 16th May 2004
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|