The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CCTV cable Q

To: <ukha_d@xxxxxxx>
Subject: Re: CCTV cable Q
From: "Mark McCall" <lists@xxxxxxx>
Date: Mon, 22 Dec 2003 09:14:03 -0000
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
References: <bs58dd+gvt2@xxxxxxx>
Reply-to: ukha_d@xxxxxxx

In my experience it depends on length, and where the cables run.  I have a
cam at our back door on CAT5 - it only has maybe 7 metres to run to Node 0
and the picture is fine.  The camera at the front door is also CAT5 but
more
like a 20 metre run and it looks terrible.  If you must use CAT5 for long
runs then look at www.kat5.com

M.


UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

References:
- CCTV cable Q
  - From: "rick_hughesuk" <rick.hughes@xxxxxxx>

Prev by Date: RE: Hangin' Fuji
Next by Date: RE: CCTV cable Q
Previous by thread: CCTV cable Q
Next by thread: RE: CCTV cable Q
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.