[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: NTL CLID
- To: <ukha_d@xxxxxxx>
- Subject: RE: NTL CLID
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Tue, 9 Dec 2003 09:14:33 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Before you get all excited ;) I would beg borrow or steal a cheap voice
modem and see if that picks up the bellcore signal, as it wouldn't be
unknown for NTL to not have turned CLI on :/
CHeers, Des.
> -----Original Message-----
> From: Wayne [mailto:wayne@xxxxxxx]
> Sent: Tuesday, December 09, 2003 00:41
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] NTL CLID
>
>
>
> Thanks!
> I have a BT box that didnt work when NTL enabled CLID (it did work on
BT
> line prior to move) so my guess is I'm using the 'other' standard! -
> which is good for what I want to try and do with asterisk pbx - that
> doesnt work with the BT standard! - so could be onto a winner!
>
> Ta !
> Wayne.
>
> Des Gibbons wrote:
>
> >NTL use both Bellcore standard and BT standard for CLID.
> >
> >It depends what exchange you are connected to.
Home |
Main Index |
Thread Index
|