[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: CBus Protocol Specification
- To: ukha_d@xxxxxxx
- Subject: Re: CBus Protocol Specification
- From: "andraper2003" <anthonyd@xxxxxxx>
- Date: Fri, 05 Dec 2003 19:42:04 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Dumb Question perhaps... whats is xAP?
Thanks
Anthony
--- In ukha_d@xxxxxxx, "Kevin Hawkins" <lists@u...> wrote:
> There are two C-bus protocols - the one actually on the wire
between
> devices and the one out say the RS232 interface which is the one
you're
> interested in. The former is totally confidential but full
details of the
> RS232 based one is available to 'C-Bus Authorised Developers'.
>
> However in recent weeks Clipsal have also made a subset
available
> publically to interested parties - you can get this after jumping
through
> some hoops on the Clipsal web site at
>
> http://www.clipsal.com/cis/profile.php3
(click on the C-Bus
Protocol link)
>
> or you could control it via xAP (from ascii RS232) and the
xAP to
> C-Bus gateway ;-)
>
> Kevin
>
>
> > -----Original Message-----
> > From: andraper2003
> > Sent: 05 December 2003 09:24
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] CBus Protocol Specification
> >
> > Hi All
> >
> > Does anyone have documentation on the CBus protocol. I
> > would like to interface an RS232 device to the CBus system
> > using an ASCII protocol if possible.
> >
> > Thanks
> > Anthony
Home |
Main Index |
Thread Index
|