|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: CBus Protocol Specification
- To: <ukha_d@xxxxxxx>
- Subject: RE: CBus Protocol Specification
- From: "Kevin Hawkins" <lists@xxxxxxx>
- Date: Fri, 5 Dec 2003 15:42:14 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
There are two C-bus protocols - the one actually on the wire between
devices and the one out say the RS232 interface which is the one you're
interested in. The former is totally confidential but full details of the
RS232 based one is available to 'C-Bus Authorised Developers'.
However in recent weeks Clipsal have also made a subset available
publically to interested parties - you can get this after jumping through
some hoops on the Clipsal web site at
http://www.clipsal.com/cis/profile.php3
(click on the C-Bus Protocol link)
or you could control it via xAP (from ascii RS232) and the xAP to
C-Bus gateway ;-)
Kevin
> -----Original Message-----
> From: andraper2003
> Sent: 05 December 2003 09:24
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] CBus Protocol Specification
>
> Hi All
>
> Does anyone have documentation on the CBus protocol. I
> would like to interface an RS232 device to the CBus system
> using an ASCII protocol if possible.
>
> Thanks
> Anthony
Home |
Main Index |
Thread Index
|
|