The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Source of acrylic rod


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Source of acrylic rod
  • From: "Graham Howe" <graham@xxxxxxx>
  • Date: Wed, 3 Dec 2003 22:01:50 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

>                 I should have mentioned....that after having trouble
> sourcing 5 or 6mm clear rod i came across "LED PIPES" clear
5mm rod
approx
> 35mm lond (can get in various smaller lengths) at my electronic
suppliers
> ..Also can get end caps in different colours although not suitable for
> FirM as the leds are too close....Let me know and i will send you some
Led
> Pipes ...
>
> Frank

I found some 'light pipes', never searched for LED pipes though. But
they seemed quite expensive and also looked as if they were designed to
fit with specific LEDs. But do feel free to send some if you have
spares, you can put them in the box with the Probe ;-)


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.