[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: AWM2 and fluorescent bulbs
> I think I'm having the same problem mentioned in this thread:
> http://www.ukha-archive.com/archives/2002-sep/msg01281.html
>
> Namely, that using a low energy flourescent light (in my case a small
> under cupboard flourescent strip) with an AWM2 module causes it to
flash
> softly just faster than once a second when it is supposed to be off.
The AWM2 has a feature that allows it to detect the presence of a load (a
bit like local control) so I'm guessing what you're seeing is the module
sending a small voltage through the load to determine if it is switched on
or not.
According to the manual (I don't actually own an AWM2 BTW) the load sensing
feature is turned off by default.
You could always try resetting the module back to factory defaults and see
if that solves the problem (just in case the load sense feature has some
how been turned on)
(reprogramming the module with a new address restores all settings to their
factory defaults)
Regards,
John
Home |
Main Index |
Thread Index
|