The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Advices


  • To: ukha_d@xxxxxxx
  • Subject: Re: Advices
  • From: Alan Shields <ha@xxxxxxx>
  • Date: Fri, 18 Apr 2003 11:15:24 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

You'd need to add some hardware so that it could transmit.
You'd need to change the firmware.

Not sure how much of the original LD11 you'd have left at the end of
all this.

Alan Shields

On Friday, April 18, 2003, at 10:56  am, Paul wrote:

> What's the possibility of modifying an LD11 to give status reporting?
I
> guess this would be pretty complex? But there'd be a lot of interest.
>
> Paul.
>
> -----Original Message-----
> From: Dave McLaughlin [mailto:dave@xxxxxxx]
> Sent: 18 April 2003 09:29
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Advices
>
> Hi Alex,
>
> If you want to build your own AM12 then look here.
>
> http://www.cix.co.uk/~pplunkett/x10.htm
>
> Won't be cheaper than buying since you will need a case etc, but for
> making
> a special interface box this is an ideal start. You even get the
source
> code
> for the PIC from the website.
>
> As for the CM12, I have not seen anything on this. To be honest, the
> best
> thing for this part is to buy a proper one and build the other parts
> yourself.
>
> Regards
> Dave...
>
> ----- Original Message -----
> From: "Alex Ciurea" <alex@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Friday, April 18, 2003 8:21 AM
> Subject: [ukha_d] Advices
>
>
>> Hello everybody,
>>
>> Are there any schemas for building my own CM12 and LM12 device?
>> The electronical parts are rare?
>>
>> Or how is the easiest way to make an application that will turn
on/off
> a
>> lamp through X10? (I'm not an 'easy person' but I don't have lots
of
>> knowledges for this type of application, so any suggestions are
more
> than
>> welcome)
>>
>> I have the software ActiveHome that will help me in controlling
the
> CM12.
>>
>> Where should I start searching?
>>
>> Thanks alot,
>> Alex
>
>
>
> ** UKHA2003 BE THERE! Details here:
> http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Make Money Online Auctions! Make $500.00 or We Will Give You Thirty
> Dollars for Trying!
> http://us.click.yahoo.com/yMx78A/fNtFAA/i5gGAA/IBOolB/TM
> ---------------------------------------------------------------------
> ~->
>
> ** UKHA2003 BE THERE! Details here:
> http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.