The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cabinet Cooling



Might you also want to drill a couple of holes at the bottom to encourage
drawing cold air in @ bottom, hot air out @ top?

-----Original Message-----
From: Dave McLaughlin [mailto:dave@xxxxxxx]
Sent: 26 September, 2002 11:58
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] Cabinet Cooling


I had exactly the same problem with my cabinet and I used to leave the door
slightly open but the sprogs kept closing it. I ended up drilling 2 holes
(about 50mm - that's 2" to you old gits) as close to the top as possible on
the rear and now I can leave the door closed and the inside stays quite cool
now.

Regards
Dave...

Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.