RE: Composite Video Question

["Keith Doxey" <lists.diyha@xxxxxxx>]

It should work but it could be that they are using one of the other
GROUND
pins within the SCART plug.

Open the plug and see what pins the cable is connected to.

4,5,9,13,17,18 are all designated ground.

Keith

-----Original Message-----
From: Daniel James [mailto:daniel@xxxxxxx]
Sent: 18 September 2002 10:14
To: Ukha_D (E-mail)
Subject: [ukha_d] Composite Video Question


Morning all

I have a CCTV camera - one of the cheapys from the homebase clearout a
while
ago!!

Anyhow this has a scart connector on the end of it... Is the output
from
this into the TV Composite Video?

I ask, as I would like to plug this into a capture card on the PC, but
the
scart adaptor I have made  just produces waves of black lines on the
screen
when I tell it to look at the composite signal.. (it doesn't work if I
plug
it into the TVs video in phono socket either)

The video in the scart socket is using the following pins:

(Data courtesy of www.kat5.tv :-)

17 VIDEO/Sync/Luminance Ground
20 VIDEO/Sync/Luminance Input

And I have wired this accross to a phono plug for the PC capture
card...

Is anyone able to shed some light as to why this doesn't work?

Cheers

Daniel



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.