The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Holy Sh*t...


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Symbol SDT-1050


  • To: ukha_d@xxxxxxx
  • Subject: Re: Symbol SDT-1050
  • From: Jon Fautley <jon@xxxxxxx>
  • Date: Wed, 11 Sep 2002 18:03:36 +0100 (BST)
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx



On Wed, 11 Sep 2002, Lee wrote:

> Dear Jon,
>                 I got one of those too. It's previous owner was Datapen
> Systems and it was sold by Peak Technologies years ago. I had a look
> inside and both the scanner and the base unit have EPROMs with "Datapen
> Systems" written on them IIRC so we need to decompile the code and write
> something new or figure out how it works. I noticed if I press enter
> thrice when it is in the cradle it will try to place the call (I assume
> this is for the RS232 comms) but I haven't got any further. When it
> fails, the scanner reboots and you will see the startup blah, which may
> be of use. Something about the Stylo Baratt SDT Loader Program IIRC.

TBH, i doubt it's worth it. These things are from 1994 - sounds like
you've got exactly the same one as me (purchased from qprfootballclub on
ebay?). Just wondered if it was possible to get it to do anything useful.
Shall prolly just re-ebay it ;)

Incidentally, when you dial in with a modem, it just sends 22- 22- 22-
over and over before giving up and dropping carrier.

>
> P.S. I am selling (via my mum's ebay account) Symbol LS2020 barcode
> scanners, which I have verified work. If you're interested let me know.
> These are RS-232 based.

ooo, interested :) got a link for me? :) (/msg me on irc if ya like)

Jon <filbert>

> Jon Fautley wrote:
>
> >Anyone know anything about these? Got one for 15 quid off ebay to play
> >with, but it seems to do FA... Just says 'Place SDT in cradle', so when I
> >so it says 'Waiting for Call'.... hmm
> >
> >Any advice at all is most appreciated,
> >
> >Cheers,
> >
> >Jon
> >
> >
> >
> >
> >http://www.automatedhome.co.uk
> >Post message: ukha_d@xxxxxxx > >Subscribe:  ukha_d-subscribe@xxxxxxx > >Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > >List owner:  ukha_d-owner@xxxxxxx > >
> >List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
> >
>
>
>
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.