The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ADSL thingy....



>
> If you use a USB device then I think the only supported one on IPCOP
is
the
> alcatel speedtouch
> however when I tested it I could only present 1 red side address -
this
may
> be an issue.

I've been checking back in my notes - I found that the USB ADSL had to have
the WAN address -
this meant there was no way of using the subnet we had been assigned -
whereas with the zyxel it had the WAN address on the ADSL and the first
address in our assigned subnet as its LAN address. We then could assign the
others in our subnet to the IPCOP red-side.

Nick.




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.