The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Color kinetics Bulk buy mini update


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: led bulk buy closing 10am thursday



Mr Bird has a lot to answer for going on holiday whilst im doing this bulk
buy!  9v or 12v should be fine to run quite a few in series.

Take a look at the link FrankM sent out earlier today for a reasonable
overview of what you need to do.  Otherwise Id recommend waiting for our own
IanB to come back off holiday!

k.


-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: Wednesday, September 04, 2002 5:41 PM
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] led bulk buy closing 10am thursday


Kieran,

I'm not entirely convinced of my own abilities here, but I'll give it a go.
I guess I'm at the "trying a few, for the garden" stage.

Could you put me down for 4 off of each of the following:

RL5-W3030 - White - 3k mcd  - 4 @ 1.24       = 4.96
RL5-W6018 - White - 6k mcd  - 4 @ 1.11       = 4.44
RL5-B2430 - Blue - 2.4 mcd  - 4 @ 1.02       = 4.04
RL5-B5516 - Blue - 5.5 mcd  - 4 @ 1.04       = 4.16

Total                                            8.80 + whatever
P&P / tax ends up being due.


I assume that all I need to test is a wallwart, some wire, and a couple of
resistors. What spec wallwart will I need?

M.




Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.