RE: Re: DVD changers

["Marcus Warrington" <marcusw@xxxxxxx>]

"Nikola Kasic" <nikola@xxxxxxx> wrote ;

I have my Sony CXD-850 (200 DVDs) MR enabled, and I found
recently that when I use Region 1 or Region 0 DVDs they are
displayed as black and white over S-video.
I am using RGB connection at the moment and that works fine,
but in some scenarios you might want to have it in node 0 and
use KAT5 to connect it to TV, so better check first that it
works O.K.

I also have a similar "problem" with my Wharfedale 750 DVD
player.
The reason it does it is because the player outputs a true NTSC (3.58)
signal for NTSC discs. The TV can't "see" this colour (because
its
looking for PAL although it will synch to 60Hz so I get a stable
picture)
and so just displays the Black and White (or Luminance) part of the
signal.
When playing RGB through scart the signal is obviously encoded as RGB
(i.e.
neither PAL or NTSC) and so the colour is fine. You could use a
transcoder
to convert the colour signal to NTSC 4.48 so that PAL TV's can see it
(i.e. NTSC 4.48) which is exactly what "NTSC Playback on PAL TV) VCR's
do,
alternatively replace the TV with one that can see a true NTSC signal.

Marcus Warrington
marcusw@xxxxxxx MIS Computer Services (UK)

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.