The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: LM12 lamp module



I have tried with the Homeseer Active X demo and the result is worst that the AutoM8it.
It impossible to dim or bri...

Dan
  ----- Original Message -----
  From: White, Peter
  To: 'ukha_d@xxxxxxx'
  Sent: Tuesday, October 22, 2002 3:12 PM
  Subject: RE: [ukha_d] LM12 lamp module


  Homeseer.  Can't help with the triac question, too technical for me!

  -----Original Message-----
  From: Dan [mailto:dtoma@xxxxxxx]
  Sent: 22 October 2002 13:19
  To: ukha_d@xxxxxxx   Subject: Re: [ukha_d] LM12 lamp module


  Hi Pete,

  What application do you use to dim/bri-it?

  Another question... someone have tried to change the included triac
  BTA10-400C (10A/400V) with a BT139/800 (12A/800) one in order to increase
  the maximum power? I need to operate a set of 15x50W halogen spots (750W).

  This modification is enough or more changes in the schematic are necessary?

  Thank you,
  Dan
    ----- Original Message -----
    From: White, Peter
    To: 'ukha_d@xxxxxxx'
    Sent: Tuesday, October 22, 2002 2:54 PM
    Subject: RE: [ukha_d] LM12 lamp module


    I think it's rated at 40w minimum. I've got one driving 3x15w and it works
    fine.

    Pete

    -----Original Message-----
    From: Dan [mailto:dtoma@xxxxxxx]
    Sent: 22 October 2002 12:57
    To: ukha_d@xxxxxxx     Subject: Re: [ukha_d] LM12 lamp module


    Hi,

    How much do you load it?
    I hear that it is not reliable at low power loads (<60W).


    Dan
      ----- Original Message -----
      From: Mark Harrison
      To: ukha_d@xxxxxxx
      Sent: Tuesday, October 22, 2002 2:16 PM
      Subject: RE: [ukha_d] LM12 lamp module


      Dan,

      LM can be brightened and dimmed.

      I've never had problems with mine :-(

      M.

      -----Original Message-----
      From: Dan [mailto:dtoma@xxxxxxx]
      Sent: 22 October 2002 08:29
      To: ukha_d@xxxxxxx       Subject: [ukha_d] LM12 lamp module


      Hi all,

      How a LM12 lamp module must work?

      Is it able to dim and bright, or only to dim?
      I have a new one and it is almost impossible to use it.
      Loaded with an 100W lamp it can be ON/OFF using X10 commands, but when
    dim,
      sometimes it try to dim a little bit then start to flash and it can not
  be
      powered off by X10 commands anymore. It must be disconnected from the
    mains
      in order to stop it.

      Another question: It is possible to have local dim/bright commands for
    LM12
      module, by modifying it?

      Anyone can help?

      Thank you,
      Dan



      http://www.automatedhome.co.uk
      Post message: ukha_d@xxxxxxx
      Subscribe:  ukha_d-subscribe@xxxxxxx
      Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
      List owner:  ukha_d-owner@xxxxxxx
      List of UKHA Groups here -
  http://groups.yahoo.com/group/UKHA_Grouplists/

      Your use of Yahoo! Groups is subject to
  http://docs.yahoo.com/info/terms/



      ________________________________________________________________________
      This email has been scanned for all viruses by the MessageLabs SkyScan
      service. For more information on a proactive anti-virus service working
      around the clock, around the globe, visit http://www.messagelabs.com
      ________________________________________________________________________

            Yahoo! Groups Sponsor
                  ADVERTISEMENT
                
                 
          
          

      http://www.automatedhome.co.uk
      Post message: ukha_d@xxxxxxx
      Subscribe:  ukha_d-subscribe@xxxxxxx
      Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
      List owner:  ukha_d-owner@xxxxxxx
      List of UKHA Groups here -
  http://groups.yahoo.com/group/UKHA_Grouplists/

      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


    [Non-text portions of this message have been removed]



    http://www.automatedhome.co.uk
    Post message: ukha_d@xxxxxxx
    Subscribe:  ukha_d-subscribe@xxxxxxx
    Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
    List owner:  ukha_d-owner@xxxxxxx
    List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

    Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



    This electronic transmission is considered PRIVILEGED AND CONFIDENTIAL
    information and is
    intended only for the use of the addressee(s) named above.

    If the reader of this message is not the intended recipient or the
  employee
    or agent responsible for delivering
    the message to the intended recipient(s), please note that any
    dissemination, use, distribution or copying of this
    communication is strictly prohibited and may be unlawful.

    Anyone who receives this communication in error should notify the sender
    immediately by telephone at
    +44 (0)1753 778888 and should destroy and delete the message  immediately.

    http://www.banctec.co.uk

          Yahoo! Groups Sponsor
                ADVERTISEMENT
              
               
        
        

    http://www.automatedhome.co.uk
    Post message: ukha_d@xxxxxxx
    Subscribe:  ukha_d-subscribe@xxxxxxx
    Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
    List owner:  ukha_d-owner@xxxxxxx
    List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


  [Non-text portions of this message have been removed]



  http://www.automatedhome.co.uk
  Post message: ukha_d@xxxxxxx
  Subscribe:  ukha_d-subscribe@xxxxxxx
  Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
  List owner:  ukha_d-owner@xxxxxxx
  List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

  Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



  This electronic transmission is considered PRIVILEGED AND CONFIDENTIAL
  information and is
  intended only for the use of the addressee(s) named above.

  If the reader of this message is not the intended recipient or the employee
  or agent responsible for delivering
  the message to the intended recipient(s), please note that any
  dissemination, use, distribution or copying of this
  communication is strictly prohibited and may be unlawful.

  Anyone who receives this communication in error should notify the sender
  immediately by telephone at
  +44 (0)1753 778888 and should destroy and delete the message  immediately.
  http://www.banctec.co.uk

        Yahoo! Groups Sponsor
              ADVERTISEMENT
            
             
      
      

  http://www.automatedhome.co.uk
  Post message: ukha_d@xxxxxxx
  Subscribe:  ukha_d-subscribe@xxxxxxx
  Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
  List owner:  ukha_d-owner@xxxxxxx
  List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.