Re: [OT] APC UPS Cable Spec?

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi Mark
               
If its a basic serial cable it should be something like
this...


DB9                           
DB9

PIN 2     connected to   PIN 3

PIN 3     connected to   PIN 2

PIN 5      connected to  PIN 5

No hardware hand shaking in the above if it doesnt communicate try
swapping
2 + 3

pin 5 is ground on a db9

HTH

Frank



----- Original Message -----
From: "Mark McCall" <Mark@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, October 17, 2002 7:14 PM
Subject: [ukha_d] [OT] APC UPS Cable Spec?


> James and I are switching over to the new rack later today. 
The  APC UPS
I
> bought a while back will come into service too but I need to find the
spec
> of the serial cable.
>
> It's a 2200 model.  We've been to Maplins and got the plugs etc
so all we
> need are the pins outs.
>
> Can anyone help?
>
> Thanks
>
> M.
>
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.