The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

KAT5 S-Video and Plasma problem


  • To: <ukha_d@xxxxxxx>
  • Subject: KAT5 S-Video and Plasma problem
  • From: "Paul Gale" <groups@xxxxxxx>
  • Date: Tue, 19 Nov 2002 19:53:25 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I just bought a Scart to S-Video and 2 x RCA cable to hook up one of my
KAT5 units to my plasma. Only trouble is, I get a B+W picture on the
Plasma. I've checked the settings on the plasma and all seems OK (PAL,
S-video input etc). I've also checked the cabling by feeding it into my
Sony TV through the S-Video input - all OK.



When going into the plasma setup menu and switching between the
different formats (NTSC, SECAM, PAL etc), SECAM shows a more stable
picture than PAL (although still all in B+W). Any thoughts? Could the
signal through the KAT5 unit be confusing the plasma in some way (i.e.
different spec, timing etc)?



Paul.





[Non-text portions of this message have been removed]


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.