|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Spliting a cat5 cable? (Tivo Vs Cat5)
- To: <ukha_d@xxxxxxx>
- Subject: RE: Spliting a cat5 cable? (Tivo Vs Cat5)
- From: "Ian Lowe" <ian@xxxxxxx>
- Date: Thu, 7 Nov 2002 20:43:56 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>> 1) do these things really work (for 100megabit)?
>
>'fraid not. You can get 10Mbps as the spec for this requires only two
wire
>pairs, but the 100Mbps spec requires all four pairs.
They do actually.
The four pair version of 100Mbps Ethernet fell by the wayside back when
Fast
Ethernet
products were first shipping. 100 base TX as in use today uses only two
pairs:
pins 1,2 (orange pair in 568B)
and 3,6 (blue pair in 568B)
I have used line doublers on fast ethernet, and also (with a custom
cable)
to feed ISDN and Ethernet down the same CAT-5 cable
Ian.
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|