The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Color kinetics



OK - The controller I built is still in its rat nests form but still workin= g
fine.

I started to look at adding some sort of RS232 control so that if it came t= o
it a could produce one pcb to be used either as a standalone controller or = a
RS232 controller.

I also took another look at the xAP happenings. There is PIC code available=
by the other Ian's in the group for xAP on a PIC. However the PIC sits ther= e
constantly looking at the serial stream and when it receives the correct packet actions the request. I need to keep the DMX o/p going all the time.<= BR> It is beyond a small PIC to o/p DMX and monitor and decode a RS232 stream.<= BR> Although I could increase the PIC to a more powerful unit it will still mea= n
writing some fancy interupt routines. The easiest way is to use two small PIC's (only adds =A31.45 on to the cost) and let them talk at the appropria= te
time.

There seems to have been a change in the xAP protocol recently and also
mention of PIC code to handle xAP on its own. I was going to post to the xA= P
group but they have seemed quite busy of late with the protocol changes etc= .
So for the time being the project is holding. I would be interested if
anyone has any ideas on this or if anyone form the xAP group would like to<= BR> comment ?

Ian D


> Any news on the DMX controller ya built?
>
> -----Original Message-----
> From: Ian Davidson [mailto:ian@xxxxxxx]
> Sent: 06 November 2002 7:24 PM
> To: HA Yahoo group UK
> Subject: [ukha_d] Color kinetics
>
> Hi All
>
> I had been holding off posting hoping to have some more news by now. I=
> spoke to the supplier again today, he asked me to phone again next
> Tuesday so I'll hold off until then to see if I can finally get the > remaining units.
>
> Ian D
>
>
>
> [Non-text portions of this message have been removed]
>
>
> http://www.automatedhome.co= .uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
> http://grou= ps.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/in= fo/terms/
>
>
>
> http://www.automatedhome.co= .uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.