The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: mills tools?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: More Plasma stuff!


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: More Plasma stuff!
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Mon, 4 Nov 2002 12:13:10 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


> > Why can't you use sync for sync? Is the sync input the same as the
> > composite
> > input?
> >
> > So you can't have a RGB connection and an Svideo connection at the
> same
> > time? Bit of a bad design!
> >
> > Cheers, Des.
> >
> >
>
>
> Most tellys use composite for sync you just don't notice cos its all
> hidden in a scart lead!


Indeed, the scart pinout uses the same pin for sync and composite video, I
was just remarking that it was strange the Panny doesn't allow you to use
RGB and s-video at the same time

You can use H+V sync on the panel with a sync
> splitter.

Hmmm, is it normal for the H-sync connection to take in composite sync also?


John Sim makes one with a VGA connector on it, and you can
> hook it up with an RGB -> 5BNC cable, but it is probably a bit of a
> bundle to run over 20m (as is RGB).


Make more sense to use the sync splitter at the business end and use
Kat5-RGBS to transmit the signal over cat5. Assuming you can hide the sync
splitter out of sight ;)

Cheers, Des.


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.