The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Electronics Gurus brain required...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Electronics Gurus brain required...
  • From: "Dr John Tankard" <john@xxxxxxx>
  • Date: Sun, 26 May 2002 17:22:26 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Its ok, I must have missed/forgotton about previous posts, I assume that
you are driving relays with port A which is switching your IR, so where
you say A1, you mean the output from a relay trigerred by the open
collector output on A1.

Just a couple of small points remember that when you select your relay's
the max current sink on port a is 2W (all zones on) so dont go using any
old big relays, just small ones for the job, to save connections you
could have revered the connections (and the diodes) and had the relay
arriveing where you have the +5 and the far edges of the board 5v, you
would half the number of wires, as you would just be connecting a comman
link across the ends.

John

PS like the breadboard programme


> -----Original Message-----
> From: andy_powell_is [mailto:ukha@xxxxxxx]
> Sent: 26 May 2002 14:44
> To: ukha_d@xxxxxxx > Subject: [ukha_d] Electronics Gurus brain required...
>
>
> Ok,
>
> So Keith is busy working on KAT5 (which makes sense) so I decided to
> take another look at the El Cheapo Homevision IR Zone interface thing
> again to see if I could work it out...
>
http://groups.yahoo.com/group/ukha_d/files/HVIR.jpg is what I came up
with...

Could one of you electronics Gurus take a look and see if my logic is
correct or if I have totally got the wrong idea...

I'm expecting 2 things to happen.. the IR emitters to - err emit the
ir and the LEDs for whichever zones to flash at the same time...

Thanks,

Andy



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.