The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CT100 satellite cable


  • To: ukha_d@xxxxxxx
  • Subject: Re: CT100 satellite cable
  • From: "haweste" <haweste@xxxxxxx>
  • Date: Fri, 24 May 2002 11:48:59 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Lee,

I was going to respond earlier but have only just connected it. I've
used about 200m of this in my house. The foil shield is aluminium
instead of the more usual copper. My roll of "proper" CT100 from =
*aplins ran out and needed some more quickly.

My original set-up consisted of a length of *aplin CT100 from the
minidish, down the side of the house and through the wall, straight
into the digibox. Total length approx 7m, 'F' plugs at each end and
no joins. This run was about as good as it could get.

The new setup consists of:
20m of *aplin CT100 from minidish to node zero, 'F' plugs and
a 'F'plug inline connector, 10m of B&Q DCT100 from node zero to
digibox, another in-line 'F' connector and a short flylead to the
decoder.

Checking signal strength & quality via the digibox I could see _NO_ difference between the 2 setups on broadly the same atmospheric
conditions (I would've expected some degradation just because of the
joins alone). In the recent heavy rain / thunderstorms the signal
quality has deteriorated and picture has jumped etc. but I'm pretty
sure that would've happened whatever cable I'd used.

For =A318 or =A319 per 100m it's a bargain. My original *aplin CT100 was over =A340 per 100m.

HTH,

Tim H.

--- In ukha_d@y..., lee.taylor@a... wrote:
>
> A friend of mine at work mentioned that B&Q warehouse (Leicester) =
was
> selling 100m rolls of CT100 for =A319.?? (can't remember exactly). I <= BR> thought
> this was a pretty good deal, so went down there on Saturday. Sure
enough,
> sealed rolls with a sticker on them saying 'DCT100' and a matching price
> tag on the shelf.
>
> Looking closely at the end of the cable, the foil under the copper braid
> was silver. Now, I thought that CT100 was supposed to be copper
foil under
> copper braid (something to do with preventing long term corrosion). Can
> someone put me right on this please?
>
> And anyway, what is 'DCT100'?   Is it B&Q's code for 'Di= gital CT100'
> perhaps?
>
> Thanks in advance.
>
> Lee


For more information: http://www= .automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.